V596 Home HD contamination: correct it, backup dialysis if needed
Written V0596 on the CMS-2567 and in QCOR.
Cited on this tag? What happens after a citation · One-page sheet for the binder
The regulation
§ 494.100(c) Standard: Support services. (1) …Services include, but are not limited to, the following: (v) …testing of the water and dialysate system in accordance with—
(C) The dialysis facility must correct any water and dialysate quality problem for the home hemodialysis patient, and if necessary, arrange for backup dialysis until the problem is corrected if—
(1) Analysis of the water and dialysate quality indicates contamination; or
(2) The home hemodialysis patient demonstrates clinical symptoms associated with water and dialysate contamination.
CMS's interpretive guidance
Interpretive Guidance § 494.100 (c)(1)(v)(C)(1) and (2):
If analysis of the water and/or dialysate quality indicates contamination (i.e. microbial action levels or maximum level(s) of chemical contaminants are exceeded), the facility should evaluate for possible sample contamination and at minimum, when the threat is low, re-test. If the threat is higher or the re-test remains positive, the facility must correct the water treatment and/or dialysate delivery (machine) system to ensure product water and dialysate meet AAMI standards for chemical levels and microbial counts.
When unable to make such corrections in time to allow home hemodialysis to resume within an acceptable time frame, the dialysis facility must arrange for back-up dialysis until the home system is corrected. If an integrated system is involved and all applicable disposable components are replaced, treatment may continue, with testing to continue per schedule.
If the patient exhibits clinical symptoms associated with water and dialysate contamination that cannot be readily attributed to other causes, the facility must arrange for back-up dialysis until the problem is investigated and resolved. Clinical symptoms for water/dialysate contamination may include, but are not limited to, chills, shaking, fever, vomiting, headache, dizziness, muscle weakness, skin flushing, itching, diarrhea, hyper/hypotension, hemolysis, and anemia. If such symptoms are present, the facility must notify the patient’s physician/medical director to determine appropriate action (i.e., culture and treatment).
Facility policies must address, and responsible staff members (e.g., home training nurse, chief technician responsible for the home program, etc.) must be aware of what responsive and corrective actions they should take if microbial and/or chemical test results were elevated, or should a patient exhibit such clinical symptoms, including but not limited to referral for immediate patient evaluation and treatment by the patient’s physician or a non-physician practitioner (i.e., advanced practice registered nurse, or physician assistant) and, possible arrangement for back-up dialysis, if needed, until the cause of the symptoms is identified and any problems with the home water treatment and dialysate delivery system are resolved.
Connected tags
Tags whose guidance points here
Questions on this site that cite it
Rulebook subjects that cite it
https://middlemolecule.com/rulebook/tags/v596/