V335 Cleaning agents: rinse between chemicals
Written V0335 on the CMS-2567 and in QCOR.
Cited on this tag? What happens after a citation · One-page sheet for the binder
The regulation
ANSI/AAMI RD47:2002/A1:2003 Requirements as Adopted by Reference 42 CFR § 494.50(b)(1)
11.2 Rinsing/cleaning: chemicals used/rinse after each
11.2.4
Diluted solutions of hydrogen peroxide, sodium hypochlorite, peracetic acid, or other chemicals may be used as cleaning agents for the blood compartment, provided that the cleaning agent has been shown to be reduced to safe levels by subsequent flushing and has no significant adverse effects on the structural integrity and performance of the dialyzer.
Each chemical shall be rinsed from the dialyzer before the next chemical is added, unless mixing is known to be safe and effective for reprocessing.
CMS's interpretive guidance
Interpretive Guidance § 494.50(b)(1)
ANSI/AAMI RD47:2002/A1:2003
11.2 Rinsing/cleaning
11.2.4
A cleaning agent, such as sodium hypochlorite, shall be rinsed from the dialyzer before adding formaldehyde, in order to avoid noxious fumes and degradation of disinfectant. Combining sodium hypochlorite and peracetic acid may produce hydrochloric acid vapors, which are harmful if inhaled.
Additional Guidance:
While one chemical may be used as a cleaning agent and a second chemical used as a germicide, the first chemical must be rinsed from the dialyzer before the next chemical is added, unless it has been demonstrated that mixing of the two chemicals is safe and effective. Allowing chemicals to mix may risk unexpected reactions that could lead to staff injury or damage to the structural integrity and performance of the dialyzer. If bleach is used as a cleaning agent, a procedure must be in effect to limit the time the dialyzer may be exposed to bleach, as prolonged exposure may damage the dialyzer membrane.
https://middlemolecule.com/rulebook/tags/v335/